The AmGood AMGGT-14-7G is a point-of-use commercial grease trap (grease interceptor) rated for 7 GPM of flow with 14 lb of grease capacity. It is built from heavy 11-gauge carbon steel. Inlet and outlet are 2″ no-hub connections. A flow-control fitting is included to hold the rated flow so grease separates properly. It installs indoors near the fixture — under a 3-compartment sink, dishmachine, or prep line — and should be cleaned before grease and solids reach about a quarter of the liquid depth. It is built to PDI G101.
Specifications
| Spec | Detail |
|---|---|
| Flow rate | 7 GPM |
| Grease capacity | 14 lb |
| Liquid capacity | — |
| Material | Carbon steel |
| Inlet / outlet | 2" |
| Connection | No-hub |
| Flow control | Yes |
| Location | — |
| Installation | — |
| Removable baffles | Yes |
| Certification | PDI G101 |
| Weight | 48 lb |
| NSF listed | — |
| Warranty | — |
A dash (—) means the manufacturer has not published that specification.
Pulled from AmGood
Health-department & code relevance
Warewashing sink — most jurisdictions require a 3-compartment sink for manual wash-rinse-sanitize (FDA 4-301.12), plus an separate hand sink. Requirements by state →
Shipping & handling
Shipping weight, dimensions and carrier method aren't published for this model yet. Check the manufacturer's spec sheet or ask a dealer for the crate weight and whether it ships LTL freight or parcel before you compare landed cost.
Selling a used compartment sink?
Closing, upgrading, or liquidating a kitchen? List your used compartment sink on FoodServiceNerd — operators and dealers search here for gear. Free to list during early access.
List your equipment →