Skip to main content
foodservicenerd
Reach-in refrigerator · 2 glass doors

True GDM-41SL-48-HC-LD — Reach-In Refrigerator with 2 Glass Doors, 47.13"W x 21"D x 47.75"H, 12.35 cu ft

12.35 cu ft · R-290 refrigerant
Specs from ENERGY STAR public data · product photo/drawing via manufacturer media library
Front-of-house / grab-and-goStandard full-service line
Capacity
12.35 cu ft
2-door glass
Energy use
1.62 kWh/day
ENERGY STAR certified
Est. energy cost
$96/yr
US avg commercial rate
Refrigerant
R-290
GWP 3
True GDM-41SL-48-HC-LD — Reach-In Refrigerator with 2 Glass Doors, 47.13"W x 21"D x 47.75"H, 12.35 cu ft

Our read & the right size

At 1.62 kWh/day, the True GDM-41SL-48-HC-LD runs more efficient than 73% of the 293 comparable 2-door reach-in refrigerators we track — about $35/yr under the median comparable model.

How we compare: “comparable” = matched on door count (2-door) and type (reach-in refrigerator), among ENERGY STAR-certified models with a published kWh/day figure — the 293 such units we track · group median 2.21 kWh/day (≈ $131/yr) · this model 1.62 kWh/day · source: ENERGY STAR certified product data, as of July 2026.

The two-door reach-in (~43–49 cu ft) is the workhorse of most kitchens: enough cold storage for a full line without a walk-in's footprint. It's the default unless you're very small (one door) or high-volume (three).

12.35 cu ft is roughly 0.6× a typical home refrigerator — about 6 full sheet pans or ~10 cases of product (varies with shelving).

Photos & drawings

Full specifications

Dimensions47.13"W x 21"D x 47.75"H
Capacity12.35 cu ft
Doors2
Door styleGlass

Refrigerant & future-proofing FUTURE-PROOF

Uses R-290 (GWP 3) — a low-GWP natural refrigerant, well under regulatory thresholds and unaffected by the HFC phase-down.

Energy & cost of ownership

1.62 kWh/day × 365 × $ 0.163/kWh ≈ $96/year

≈ $960 over a 10-year life at the US average commercial rate — adjust to your utility rate for a local figure.

Utility rebates ENERGY STAR

Because this model is ENERGY STAR certified, it is commonly eligible for commercial-kitchen utility rebates (many electric utilities pay $50–$400 per qualifying reach-in). Check your utility’s foodservice program. Find rebates in your area →

Cross-reference — comparable 2-door models

Brand / modelVolumeEnergyvs. this
Continental Refrigerator RA43N12.35 cu ft1.05 kWh/d↓ 35% less
Turbo Air JUR-60S-N612.4 cu ft1.05 kWh/d↓ 35% less
FRESH FUR-48-HC12.46 cu ft1.03 kWh/d↓ 36% less
Everest ETR211.97 cu ft1.12 kWh/d↓ 31% less
Display Source Alliance Dula3012.78 cu ft1.37 kWh/d↓ 15% less

Matched on type, door count and capacity (±15%).

Health-department & code relevance NSF/ANSI 7

Commercial kitchens holding cold TCS foods need NSF-listed refrigeration that holds 41°F (5°C) or below (FDA Food Code 3-501.16). Equipment must be commercially certified for sanitation (4-205.10, NSF/ANSI 7). This model is ENERGY STAR certified; confirm the NSF mark on the cut sheet.

See what's required in your state & county →

Frequently asked

What temperature does the True GDM-41SL-48-HC-LD hold?
As a reach-in refrigerator it is built to hold 41°F (5°C) or below — meeting the FDA Food Code cold-holding requirement.
How much does it cost to run?
About $96/year in energy at the US average commercial rate (1.62 kWh/day). Roughly $960 over 10 years.
Is R-290 refrigerant a problem?
Uses R-290 (GWP 3) — a low-GWP natural refrigerant, well under regulatory thresholds and unaffected by the HFC phase-down.
Is it NSF certified?
ENERGY STAR-certified commercial refrigeration in this class is NSF/ANSI 7 listed for commercial use — confirm the mark on the current spec sheet.

Shipping & handling

Shipping weight, dimensions and carrier method aren't published for this model yet. Check the manufacturer's spec sheet or ask a dealer for the crate weight and whether it ships LTL freight or parcel before you compare landed cost.

Related equipment

What to check when buying reach-in refrigerators

Size usable cubic feet to your storage needs, then verify door and compressor configuration.

Try the Refrigeration sizing →