Skip to main content
foodservicenerd
Hand Sink

Advance Tabco 7-PS-56 — Wall-Mount Hand Sink, 9"W x 9"D, 20-ga 304 stainless, side splashes

Specs & image © Advance Tabco. Independent reference — verify on the spec sheet.
Dimensions
9" deep × 9" long
Advance Tabco 7-PS-56 — Hand Sink, 9"W x 9"D, 20-ga stainless steel

The Advance Tabco 7-PS-56 is a wall-mount commercial hand sink measuring 9″×9″, built from 20-gauge 304 stainless. It uses a standard manual faucet. A faucet is included; side splashes contain spray. The 304 alloy resists corrosion in a wet handwashing area. It is NSF listed.

Buying considerations

Most health codes call for a hand sink within reach of every prep and cook station; hands-free knee, foot, or sensor valves help with compliance and cut cross-contamination. Confirm the required number and placement for your layout. Browse all hand sinks →

Specifications

SpecDetail
MountWall-mount
Overall width9"
Overall depth9"
Overall height—
Bowl width9"
Bowl front-to-back9"
Bowl depth5"
MaterialStainless steel
Stainless gradeType 304 stainless
Gauge20 gauge
ActivationManual
Faucet includedYes
Faucet centers4
Side splashesYes
Soap & towel dispenserNo
ADA compliantNo
Drain size1.5"
NSF listedYes
Warranty—

A dash (—) means the manufacturer has not published that specification.

Pulled from Advance Tabco · spec sheet (PDF) ↗

Shipping & handling

UPS / small parcel — light enough to ship ground (14.0 lb), no freight appointment or liftgate needed.

Ships byUPS / ground parcel
Product weightNot published
Shipping weight14.0 lb
Shipping dimensionsNot published

Related equipment

What to check when buying Commercial Hand Sinks

Confirm code-required placement and hands-free options for your compliance zone.

Try the Water heater sizing calculator →
Published by Resultex Media Group LLC · Independent & vendor-neutral · Educational only, not legal or engineering advice · Last verified September 2026